SQUARE / RECTANGULAR CARBON TUBE
Available Carbon Tube Sizes
IDs for standard square and rectangular carbon tube sizes are listed
below. Wall thickness will depend on individual requirements. Sizes
not shown can be custom-ordered
from C-Tech.
Both square carbon tube and rectangular carbon tube have radiused
corners and flat sides approximately the same size as the tube ID.
Corner radius will increase with wall thickness.
Prices are quoted per metre, based on a standard modulus laminate
with approximately 30% hoop strength. Alternative laminate and fibre
orientations can be custom-ordered
from C-Tech.
Please note that there is a minimum order value of NZ $200 per shipment.
Square Carbon Tube
| ID |
ID |
OD |
OD |
Cost |
Weight for |
| (mm) |
(inches) |
(mm) |
(inches) |
(NZ$) |
Length (kg) |
| 19.0 |
0.7480 |
|
|
$ |
|
| 25.0 |
0.7874 |
|
|
$ |
|
| 25.0 |
0.9843 |
|
|
$ |
|
| 40.0 |
1.5748 |
|
|
$ |
|
| 50.0 |
1.9685 |
|
|
$ |
|
Rectangular Carbon Tube
| ID |
ID |
OD |
OD |
Cost |
Weight for |
| (mm) |
(inches) |
(mm) |
(inches) |
(NZ$) |
Length (kg) |
| 50 x 25 |
1.9685 x 0.9843 |
|
|
$ |
|
| 50 x 38 |
1.9685 x 0.5906 |
|
|
$ |
|
| 60 x 25 |
2.3622 x 0.9843 |
|
|
$ |
|
| 60 x 35 |
2.3622 x 0.5906 |
|
|
$ |
|
| 80 x 25 |
3.1496 x 0.9843 |
|
|
$ |
|
|
